Measurement-computing 200 Series DaqBook User Manual download pdf (Page 39)

Daq Systems

02-13-02

DBK Basics, pg. 3

Connecting DBKs to Daq PC-Cards

The Daq PC-Card is only intended for connections to a P1 connector of a single “passive” DBK card or

module. A passive DBK card or module is one that provides a desired connectivity (such as BNCs or screw

terminals), but performs no signal conditioning.

A CA-134 Interface Cable and a CN-86-F (dual DB37 female adapter) are used to provide the DB37,

P1 connector.

Daq PC-Card Cabling

The CA-134 cable connects to a CN-86-F adapter, which then connects to a single “passive” card or

module. The passive DBKs are:

•

DBK1 – 16 Connector BNC Module

•

DBK11A – Screw Terminal Option Card

•

DBK40 – BNC Analog Interface

Reference Note:

For information regarding the passive DBKs (DBK1, DBK11A, and DBK40), refer to the

DBK Option Cards and Modules User’s Manual (p/n 457-0905) for details regarding

both hardware and software in relevant to DBKs.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 53 54

No comments

Measurement-computing 200 Series DaqBook User Manual Page 39