Measurement-computing PCM-DAC02 User Manual download pdf (Page 7)

3 INTERFACING

The PCM-DAC02 connector has two single-ended analog outputs, one interrupt input,

eight digital inputs/outputs and three ground pins. A chassis ground is in the cable

shield clips to either side of the 15 pins of the connector.

3.1 PCM-DAC02 CONNECTOR

Figure 3-1 shows a PCM-DAC02 case looking into the connector. The KEY helps to

insure that the cable is inserted in the correct orientation.

Figure 3-1. PCM-DAC02 I/O Connector

Analog devices to be controlled should be connected with the high side to the

numbered analog output and the low side to an adjacent ground.

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

No comments

Measurement-computing PCM-DAC02 User Manual Page 7