Measurement-computing Data Acquisition Systems rev.10.4 User Manual Page 279
- Page / 366
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Programmer’s Manual 908594 Daq API Command Reference 4.6-1
daqSetOption
Also See: daqAdcExpSetBank
Format
daqSetOption (handle, chan, flags, optionType, optionValue)
Purpose
daqSetOption allows the setting of options for a device’s channel/signal path configuration.
Parameter Summary
Parameter Type Description
handle DaqHandleT
The handle to the device for which to set the option
chan DWORD
The channel number on the device for which the option is to be set
flags DWORD
Flags specifying the options to use
optionType DaqOptionType
Specifies the type of option
optionValue FLOAT
The value of the option to set
Parameter Values
handle: obtained from the daqOpen function.
chan: valid values range from 0 to 271
flags: see table below
optionType: see table below
optionValue: values available depend on optionType parameter --see optionType table below
Parameter Type Definitions
flags
Definition Description
DcofChannel
Apply option to the channel specified by the chan parameter.
DcofModule
Apply option to the entire module for which chan is located.
DcofSubChannelLow
(For WBK17 Only)
Counter Low Word. SubChannel identifier for WBK17 Detection Options. Use enum + detection number
(1 through 16). Note that WBK17 Detector Options require sub-channel in DaqChanOptionFLagType.
Some Option Types have enumerated Option Values (DaqChanOptionValue).
DcofSubChannelHigh
(For WBK17 Only)
Counter High Word. SubChannel identifier for WBK17 Detection Options. Use enum + detection number
(1 through 16). Note that WBK17 Detector Options require sub-channel in DaqChanOptionFLagType.
Some Option Types have enumerated Option Values (DaqChanOptionValue).
optionType-DaqOptionType
DBK 4 Options
Option Type
(optionType)
Description
Option Value
(optionValue)
Description
DcovDbk4Freq18kHz
LPF 3dB level is 18MHz
DcovDbk4Freq9000Hz
LPF 3dB level is 9MHz
DcovDbk4Freq4500Hz
LPF 3dB level is 4.5MHz
DcovDbk4Freq2250Hz
LPF 3dB level is 2.25MHz
DcovDbk4Freq1125Hz
LPF 3dB level is 1125Hz
DcovDbk4Freq563Hz
LPF 3dB level is 563Hz
DcovDbk4Freq281Hz
LPF 3dB level is 281Hz
DdcotDbk4MaxFreq
Set the DBK4 Low Pass
Filter (LPF) Frequency
DcovDbk4Freq141Hz
LPF 3dB level is 141Hz
DcovDbk4BaselineNever
Baseline is not set when
configuring the scan group (see
daqAdcSetScan )
DdcotDbk4SetBaseline
Set the DBK4 Baseline usage
DcovDbk4BaselineOneShot
Baseline is set when configuring
the next scan group (see
daqAdcSetScan
)
(continued)
- *372195A-01* 1
- How to use this Manual 3
- 908494 Programmer’s Manual 4
- Table of Contents 5
- Introduction 1 7
- Language Support 8
- Driver Installation 9
- 908494 Programmer’s Manual 10
- Data Acquisition Environment 11
- Signal Environment 12
- 988594 Programmer’s Manual 14
- For x% = 0 To 3 30
- 0, 0, x%, bitVal&) 30
- Next x% 30
- Zero Compensation 33
- Linear Conversion 35
- End Sub 36
- Using Multiple Devices 3 37
- Internal Clock Method 40
- Master Clock Method 41
- External Clock Method 43
- Overview 45
- 938395 Programmer’s Manual 46
- Mask and Flag Definitions 50
- 961 962 963 ... 999 59
- 941 942 ... 958 959 960 59
- Raw Data Formats 81
- Setting the Scan Rate 89
- Scan Rate Mode 89
- Scan Rate State 90
- Actual Scan Rate 90
- 94
- DBK16-Read Offset Trimpot 95
- DBK43-Read Offset Trimpot 96
- Typical flags Settings 100
- Settings 101
- Prototypes 102
- Program References 102
- Function Usage 104
- Visual BASIC 105
- Returns 114
- Data Transfer Progress 115
- Example Acquisition States 116
- DazcNone 124
- DazcAutoZero 124
- Parameter Type Description 129
- Definition Description 129
- Purpose 131
- Offset value to apply 142
- Parameter Values 144
- parameters 148
- Parameter Summary 150
- Parameter Type Definitions 150
- Moving Averages 160
- Definition Description 165
- Using Thermocouples (T/Cs) 172
- T/C Gains Settings 173
- Daq/2000 Series devices* 174
- Setting the Output Mode 184
- Buffer Management 201
- DAC0 DAC1 DAC2 DAC3 P3 DO 202
- DAC0 DAC2 P3 DO 202
- Note 1: 206
- Offset for header in bytes 208
- Update Cycle Data Blocks 211
- Update/Sample Data Format 212
- Output From File Operation 212
- DaqBoard/2000c Series 219
- Setting the DAC Value 227
- 908794 Programmer’s Manual 232
- (continued) 249
- DdiProtocolInfo 251
- DdiExtFeatures 251
- Local I/O 262
- Expansion I/O 262
- Local I/O 266
- 957193 Programmer’s Manual 280
- (for 14 sample settings 282
- 2, 4, 8, 16, 32, 64 282
- 128, etc. up to 16384) 282
- Option Value (optionValue) 284
- Counter Mode 285
- 908594 Programmer’s Manual 286
- Set the Excitation Source 289
- DmotWbk14ExcSrcApply 289
- Sets the Dac Offset 290
- Use DC coupling when 290
- Example: 291
- DcovWbk17Mode_Period 295
- DcovWbk17Mode_Pulsewidth 296
- DcovWbk17Mode_Timing 296
- DcovWbk17Mode_Encoder 296
- Setting the Trigger Level 306
- API Error Codes - daqError 319
- A2 - 162 331
- Programmer’s Manual 332
- Appendix A A 333
- 988294 Programmer’s Manual 334
- 939198 Programmer’s Manual 336
- Custom OEM Installation C 337
- WIN 9x/Me WIN NT/2000/XP 338
- WIN 9x/Me and 338
- WIN NT/2000/XP 338
- Installation Locations: 339
- 958293 Programmer’s Manual 340
- 938295 Programmer’s Manual 342
- Format 347
- Time-of-Day Configuration 356
- Glossary 359
- 986896 Programmer’s Manual 360
- 986896 Glossary G-3 361
- 986896 Glossary G-5 363
- 986896 Glossary G-7 365
Related products and manuals for Hardware Measurement-computing Data Acquisition Systems rev.10.4
(44 pages)Whirlpool AWA 6125 manuales
Manuales del propietario y guías del usuario para Lavadoras Whirlpool AWA 6125.
Ofrecemos 1 manuales en pdf Whirlpool AWA 6125 para descargar gratis por tipos de documentos: Instrucciones de uso
Comments to this Manuals