Measurement-computing USB-2408 Series User Manual download pdf (Page 18)

USB-2408 Series User's Guide Functional Details

Figure 11. Location of J6 jumper

Figure 12 shows the jumper configured for pull-up and pull-down.

Figure 12. J6 jumper configurations

6. Replace the top section of the case, and fasten it to the bottom section with the four screws. Replace the

rubber feet.

For more information about digital signal connections

For general information about digital signal connections and digital I/O techniques, refer to the Guide to DAQ

Signal Connections (available on our web site at www.mccdaq.com/signals/signals.pdf).

The pull-up/pull-down voltage is common to all of the internal 47 kΩ resistors.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 33 34

No comments

Measurement-computing USB-2408 Series User Manual Page 18