Measurement-computing USB-DIO96H User Manual download pdf (Page 8)

Chapter 2

Installing the USB-DIO96H

What comes with your shipment?

The following items are shipped with the USB-DIO96H.

Hardware

 USB-DIO96H

 External power supply and cord (PS-5V3AEPS) – 5 volt, 3 amp DC power supply

 USB cable

 Two DIN rail mounting feet

Software

 MCC DAQ CD

Documentation

In addition to this hardware user's guide, you should also receive the Quick Start Guide. This booklet provides

an overview of the MCC DAQ software you received with the device, and includes information about installing

the software. Please read this booklet completely before installing any software or hardware.

Optional components

 C50FF-x cable

Unpacking

As with any electronic device, take care while handling to avoid damage from static electricity. Before

removing the USB-DIO96H from its packaging, ground yourself using a wrist strap or touch either the

computer chassis or other grounded object to eliminate any stored static charge.

If the device is damaged, notify Measurement Computing Corporation immediately by phone, fax, or email.

 Phone: 508-946-5100 and follow the instructions for reaching Tech Support

 Fax: 508-946-9500 to the attention of Tech Support

 Email: techsuppor[email protected]

For international customers, contact your local distributor. Refer to the International Distributors section on our

web site at www.mccdaq.com/International.

Installing the software

Refer to the Quick Start Guide for instructions on installing the software on the MCC DAQ CD. This booklet is

available in PDF at www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

No comments

Measurement-computing USB-DIO96H User Manual Page 8