Measurement-computing DBK205 User Manual download pdf (Page 2)

DBK205, pg. 2

987594 DBK Option Cards and Modules

Although a 3-foot, 100-conductor ribbon cable (part number CA-195) is typically used to

connect a DaqBoard/2000 Series or /2000c Series board with a P4 adapter, the DBK205

adapter board can connect directly to the DaqBoard’s P4 connector.

Be sure to align the P4 orientation indicators () prior to mating the P4 connectors.

Connections

The DBK205 can be connected directly to the 100-pin P4 connector on the DaqBoard/2003, or /2003c.

CAUTION

Turn off power to the host PC and externally connected equipment prior to connecting

cables or signal lines to the DBK205. Electric shock or damage to equipment can result

even under low-voltage conditions.

Take ESD precautions (packaging, proper handling, grounded wrist strap, etc.)

Use care to avoid touching board surfaces and onboard components. Only handle

boards by their edges (or ORBs, if applicable). Ensure that boards do not come into

contact with foreign elements such as oils, water, and industrial particulate.

Be sure to align the P4 orientation indicators () prior to mating the P4 connectors.

DBK205

Terminations

TB1-1 AGND

TB1-2 DAC0

TB1-3 AGND

TB1-4 DAC1

TB1-5 AGND

TB1-6 DAC2

TB1-7 AGND

TB1-8 DAC3

TB1-9 AGND

TB1-10 XTTL

TB1-11 CLK

TB1-12 DGND

DBK205 Adapter DaqBoard/2003 Block Diagram

Note: DBK205 connects directly to

DaqBoard/2003’s or /2003c’s

P4 connector.

1 2

No comments

Measurement-computing DBK205 User Manual Page 2