USB-DIO96H User's Guide Specifications
16
Power
Table 2. Power specifications
USB +5 V input voltage range
External power input (Note 1)
5 VDC ± 5% (5 VDC power supply
provided)
External power supply
(included)
5 VDC, 15 W, 5% regulation
Alternate external power
supply
From PC auxiliary power (cable not included)
Jumper-selectable Molex
®
connector
internal to case
Voltage supervisor limits
4.13 V > V
ext
or V
ext
> 5.59 V
PWR LED = Off; (power fault)
User 5 V output voltage range
Available at 5 V screw terminals
User 5 V output current
available
Total from all 5 V screw terminals
Note 1: Voltage specification applies at barrel plug power input. The power supply provided with the board
meets this specification at the rated total power supply current. If a different power supply is used,
small line resistances could cause significant voltage drop between the power supply and the barrel
plug input.
Counter
Table 3. Counter specifications
TTL, rising edge triggered
Schmidt trigger hysteresis
4.0 V min, 5.5 V absolute max
1.0 V max, –0.5 V absolute min
Note 2: CTR is a Schmitt trigger input protected with a 1.5 kΩ series resistor.
Environmental
Table 4. Environmental specifications
Operating temperature range
Storage temperature range
Comments to this Manuals