1CB-7011/CB-7011D, CB-7018 User’s ManualCopyright Sept., 2000 All rights are reserved.CB-7011/CB-7011D,CB-7018User’s Manual
10CB-7011/CB-7011D, CD-7018 User’s ManualCB-7018Analog InputInput Channel:8 differential or 6 differen-tial and 2 single-ended.Jumper select.Input Typ
11CB-7011/CB-7011D, CB-7018 User’s Manual1.4 Block Diagram
12CB-7011/CB-7011D, CD-7018 User’s ManualCB-7018/18P Analog InputChannel 0 to 5 Wire Connection1.5 Wire ConnectionCB-7011/11D/11P/11PDAnalog Input Wir
13CB-7011/CB-7011D, CB-7018 User’s ManualCB-7018/18P Analog InputChannel 6 and 7 Wire Connec-tion, while the jumper JP1 set-ting is 8 differential mo
14CB-7011/CB-7011D, CD-7018 User’s Manual1.6 Quick StartRefer to “CB-7000 Bus Converter User Manual” and“Getting Start” for more details.1.7 Default S
15CB-7011/CB-7011D, CB-7018 User’s Manual1.9 CalibrationRead Carefully Before Performing CalibrationCalibration Requirement for CB-7011/11D/11P/11PD/
16CB-7011/CB-7011D, CD-7018 User’s Manual1.10 Configuration TablesConfiguration Table of CB-7011/11D/11P/11PD/18/18P:Baud rate Setting (CC)Analog Inpu
17CB-7011/CB-7011D, CB-7018 User’s ManualepyTedoCegnaRtupnItamroFataD.S.F+oreZ.S.F-0051+ot51-VmtinUreenignE000.51+000.00+000.51-RSFfo%00.001+00.000+00
18CB-7011/CB-7011D, CD-7018 User’s ManualepyTedoCegnaRtupnItamroFataD.S.F+oreZ.S.F-E0epyTJ067ot012-suisleCeergedtinUreenignE00.067+000.00+00.012-RSFfo
19CB-7011/CB-7011D, CB-7018 User’s ManualepyTedoCegnaRtupnItamroFataD.S.F+oreZ.S.F-61epyTC0232ot0suisleCeergedtinUreenignE0.0232+000.00+000.00+RSFfo%0
2CB-7011/CB-7011D, CD-7018 User’s ManualTable of Contents1. Introduction ...51.1 More Information...
20CB-7011/CB-7011D, CD-7018 User’s Manual2. CommandCommand Format: (Leading)(Address)(Command)[CHK](cr)Response Format: (Leading)(Address)(Data)[CHK](
21CB-7011/CB-7011D, CB-7018 User’s Manual)deunitnoC(steSdnammoClareneG)ataD(OAA~AA!emaNeludoMteS 91.2.ceSVEAA~AA!noitarbilaCelbasiD/elbanE 02.2.ceSste
22CB-7011/CB-7011D, CD-7018 User’s Manual2.1 %AANNTTCCFFDescription: Set module ConfigurationSyntax: %AANNTTCCFF[CHK](cr)% a delimiter characterAA add
23CB-7011/CB-7011D, CB-7018 User’s Manual2.2 #**Description: Synchronized SamplingNote: The command is for CB-7011/11D/11P/11PD only.Syntax: #**[CHK](
24CB-7011/CB-7011D, CD-7018 User’s Manual2.3 #AADescription: Read Analog InputSyntax: #AA[CHK](cr)# delimiter characterAA address of reading module(00
25CB-7011/CB-7011D, CB-7018 User’s Manual2.4 #AANDescription: Read Analog Input from channel NNote: The command is for CB-7018/18P only.Syntax: #AAN[C
26CB-7011/CB-7011D, CD-7018 User’s Manual2.5 $AA0Description: Perform Span CalibrationSyntax: $AA0[CHK](cr)$ delimiter characterAA address of setting
27CB-7011/CB-7011D, CB-7018 User’s Manual2.6 $AA1Description: Perform Zero CalibrationSyntax: $AA1[CHK](cr)$ delimiter characterAA address of setting
28CB-7011/CB-7011D, CD-7018 User’s Manual2.7 $AA2Description: Read ConfigurationSyntax: $AA2[CHK](cr)$ delimiter characterAA address of reading module
29CB-7011/CB-7011D, CB-7018 User’s Manual2.8 $AA3Description: Read CJC TemperatureSyntax: $AA3[CHK](cr)$ delimiter characterAA address of reading modu
3CB-7011/CB-7011D, CB-7018 User’s Manual2.11 $AA6 ...322.12 $AA8 ...
30CB-7011/CB-7011D, CD-7018 User’s Manual2.9 $AA4Description: Read Synchronized DataNote: The command is for CB-7011/11D/11P/11PD only.Syntax: $AA4[CH
31CB-7011/CB-7011D, CB-7018 User’s Manual2.10 $AA5VVDescription: Set Channel EnableNote: The command is for CB-7018/18P only.Syntax: $AA5VV[CHK](cr)$
32CB-7011/CB-7011D, CD-7018 User’s Manual2.11 $AA6Description: Read Channel StatusNote: The command is for CB-7018/18P only.Syntax: $AA6[CHK](cr)$ del
33CB-7011/CB-7011D, CB-7018 User’s Manual2.12 $AA8Description: Read LED ConfigurationNote: The command is for CB-7011D/11PD only.Syntax: $AA8[CHK](cr)
34CB-7011/CB-7011D, CD-7018 User’s Manual2.13 $AA8VDescription: Set LED ConfigurationNote: The command is for CB-7011D/11PD only.Syntax: $AA8V[CHK](cr
35CB-7011/CB-7011D, CB-7018 User’s Manual2.14 $AA9(Data)Description: Set CJC Offset ValueSyntax: $AA9(Data)[CHK](cr)$ delimiter characterAA address of
36CB-7011/CB-7011D, CD-7018 User’s Manual2.15 $AABDescription: Thremocouple Open DetectionNote: The command is for CB-7011/11D/11P/11PD only.Syntax: $
37CB-7011/CB-7011D, CB-7018 User’s Manual2.16 $AAFDescription: Read Firmware VersionSyntax: $AAF[CHK](cr)$ delimiter characterAA address of reading mo
38CB-7011/CB-7011D, CD-7018 User’s Manual2.17 $AAMDescription: Read Module NameSyntax: $AAM[CHK](cr)$ delimiter characterAA address of reading module
39CB-7011/CB-7011D, CB-7018 User’s Manual2.18 $AAZ(Data)Description: Set LED DataNote: The command is for CB-7011D/11PD only.Syntax: $AAZ(Data)[CHK](c
4CB-7011/CB-7011D, CD-7018 User’s Manual2.35 ~AA2 ...572.36 ~AA3EVV...
40CB-7011/CB-7011D, CD-7018 User’s Manual2.19 ~AAO(Data)Description: Set Module NameSyntax: ~AAO(Data)[CHK](cr)~ delimiter characterAA address of sett
41CB-7011/CB-7011D, CB-7018 User’s Manual2.20 ~AAEVDescription: Enable/Disable CalibrationSyntax: ~AAEV[CHK](cr)~ delimiter characterAA address of set
42CB-7011/CB-7011D, CD-7018 User’s Manual2.21 @AADIDescription: Read Digital I/O and Alarm StatusNote: The command is for CB-7011/11D/11P/11PD only.Sy
43CB-7011/CB-7011D, CB-7018 User’s Manualenable, high alarm is clear, low alarm is set, and digital input ishigh.Related Command:@AADO(Data) (Sec. 2.
44CB-7011/CB-7011D, CD-7018 User’s Manual2.22 @AADO(Data)Description: Set Digital OutputNote: The command is for CB-7011/11D/11P/11PD only.Syntax: @AA
45CB-7011/CB-7011D, CB-7018 User’s Manual2.23 @AAEATDescription: Enable AlarmNote: The command is for CB-7011/11D/11P/11PD only.Syntax: @AAEAT[CHK](cr
46CB-7011/CB-7011D, CD-7018 User’s Manual2.24 @AAHI(Data)Description: Set High AlarmNote: The command is for CB-7011/11D/11P/11PD only.Syntax: @AADI[C
47CB-7011/CB-7011D, CB-7018 User’s Manual2.25 @AALO(Data)Description: Set Low AlarmNote: The command is for CB-7011/11D/11P/11PD only.Syntax: @AADI[CH
48CB-7011/CB-7011D, CD-7018 User’s Manual2.26 @AADADescription: Disable AlarmNote: The command is for CB-7011/11D/11P/11PD only.Syntax: @AADA[CHK](cr)
49CB-7011/CB-7011D, CB-7018 User’s Manual2.27 @AACADescription: Clear Latch AlarmNote: The command is for CB-7011/11D/11P/11PD only.Syntax: @AACA[CHK]
5CB-7011/CB-7011D, CB-7018 User’s Manual1. IntroductionCB-7000 is a family of network data acquisition andcontrol modules. They provide analog-to-digi
50CB-7011/CB-7011D, CD-7018 User’s Manual2.28 @AARHDescription: Read High AlarmNote: The command is for CB-7011/11D/11P/11PD only.Syntax: @AARH[CHK](c
51CB-7011/CB-7011D, CB-7018 User’s Manual2.29 @AARLDescription: Read Low AlarmNote: The command is for CB-7011/11D/11P/11PD only.Syntax: @AARH[CHK](cr
52CB-7011/CB-7011D, CD-7018 User’s Manual2.30 @AAREDescription: Read Event CounterNote: The command is for CB-7011/11D/11P/11PD only.Syntax: @AARE[CHK
53CB-7011/CB-7011D, CB-7018 User’s Manual2.31 @AACEDescription: Clear Event CounterNote: The command is for CB-7011/11D/11P/11PD only.Syntax: @AACE[CH
54CB-7011/CB-7011D, CD-7018 User’s Manual2.32 ~**Description: Host OK.Host sends this command to all modules for broadcasting theinformation “Host OK”
55CB-7011/CB-7011D, CB-7018 User’s Manual2.33 ~AA0Description: Read Module StatusSyntax: ~AA0[CHK](cr)~ delimiter characterAA address of reading modul
56CB-7011/CB-7011D, CD-7018 User’s Manual2.34 ~AA1Description: Reset Module StatusSyntax: ~AA1[CHK](cr)~ delimiter characterAA address of setting modu
57CB-7011/CB-7011D, CB-7018 User’s Manual2.35 ~AA2Description: Read Host Watchdog Timeout IntervalSyntax: ~AA2[CHK](cr)~ delimiter characterAA address
58CB-7011/CB-7011D, CD-7018 User’s Manual2.36 ~AA3EVVDescription: Set Host Watchdog Timeout IntervalSyntax: ~AA3EVV[CHK](cr)~ delimiter characterAA ad
59CB-7011/CB-7011D, CB-7018 User’s Manual2.37 ~AA4Description: Read PowerOn Value and Safe ValueNote: The command is for CB-7011/11D/11P/11PD onlySynt
6CB-7011/CB-7011D, CD-7018 User’s Manual1.2 Pin Assignments
60CB-7011/CB-7011D, CD-7018 User’s Manual2.38 ~AA5PPSSDescription: Set PowerOn Value and Safe Value.Note: The command is for CB-7011/11D/11P/11PD only
61CB-7011/CB-7011D, CB-7018 User’s Manual3. Application Note3.1 INIT* pin OperationEach CB-7000 module has a build-in EEPROM to storeconfiguration inf
62CB-7011/CB-7011D, CD-7018 User’s Manual3.3 Dual Watchdog OperationDual Watchdog = Module Watchdog + Host WatchdogThe Module Watchdog is a hardware r
63CB-7011/CB-7011D, CB-7018 User’s Manualignore the digital output command @AADO(Data).3.6 High/Low AlarmSome analog input modules, such as the CB-701
64CB-7011/CB-7011D, CD-7018 User’s Manuallinearly proportional to temperature.To measure the Seebeck voltage directly is not availablebecause we must
65CB-7011/CB-7011D, CB-7018 User’s ManualFor Your Notes
66CB-7011/CB-7011D, CD-7018 User’s ManualFor Your Notes
67CB-7011/CB-7011D, CB-7018 User’s ManualEC Declaration of ConformityWe, Measurement Computing Corp., declare under sole responsi-bility that the prod
Measurement Computing Corporation 10 Commerce Way Suite 1008 Norton, Massachusetts 02766 (508) 946-5100 Fax: (508) 946-9500 E-mail: [email protected] ww
7CB-7011/CB-7011D, CB-7018 User’s Manual
8CB-7011/CB-7011D, CD-7018 User’s Manual1.3 SpecificationsCB-7011/CB-7011DAnalog InputInput Channel:1Input Type:mV, V, mA (with external125 ohm resist
9CB-7011/CB-7011D, CB-7018 User’s ManualCB-7011P/CB-7011PDAnalog InputInput Channel:1Input Type:mV, V, mA(with external125 ohms resistor)Thermocouple:
Comments to this Manuals