Measurement-computing CIO-DAS08-PGH User Manual download pdf (Page 20)

There are fewer ranges available for the CIO-DAS08-PGL. Gains of 2, 4 & 8 are often called binary gains. These ranges are not

available on the MetraByte DAS-8PGA.

011066+

0.6258

004044+

1.254

010022+

2.52

000000+

5.01

000188+

10.00.5

R0R1R2R3HEXDECRANGE VGAIN

CONTROL CODESBI-POLAR

CIO-DAS08-PGL

1100770 to 1.258

1010550 to 2.54

1100330 to 5.02

1000110 to10.01

R0R1R2R3HEXDECRANGE VGAIN

CONTROL CODESUNI-POLAR

CIO-DAS08-PGL

0111E14+0.018

0011C12+

0.054

0101A10+

0.52

000000+

5.01

000188+

10.00.5

R0R1R2R3HEXDECRANGE VGAIN

CONTROL CODESBI-POLAR

CIO-DAS08-PGM

1111F150 to 0.018

1010D130 to 0.14

1101B110 to 1.02

1001990 to10.01

R0R1R2R3HEXDECRANGE VGAIN

CONTROL CODESUNI-POLAR

CIO-DAS08-PGM

To set the input range of the CIO-DAS08-PGx board, select the desired range from the table and write the code in decimal or

hexadecimal to base address + 3. Here is an example in BASIC:

100 OUT &H303, 8 'Set gain = 0.5 (±10V range)

The range of the analog inputs is now set to ±10V or 2.44mV per bit (10/4096).

MA2 to MA0 = Indicates the analog input channel that is currently selected (by writing to base +2).

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Measurement-computing CIO-DAS08-PGH User Manual Page 20

Comments to this Manuals

Related products and manuals for Hardware Measurement-computing CIO-DAS08-PGH